Deutsch
English
Francais
Training overview
of our LAMTEC Academy
Our training courses take you that decisive step further.
In addition to our successful technical product training courses, we offer training on special topics such as mixed firing or project planning. In cooperation with our worldwide partners, we can offer training courses at many locations in different languages.
All our training courses include detailed training materials, lunch and drinks during the training session, but exclude travel and accommodation costs.
Our LAMTEC Academy at our modern headquarters in Walldorf is specially designed for training courses on all aspects of firing technology. In the academy, training courses are held in German, English and also in French.
In addition to the modular training courses, we would be pleased to submit an offer for an individual training course. Just ask us.
LAMTEC LT4 Measurement Training
LAMTEC sensors and measuring systems ensure the correct measurement for optimum combustion. Our measuring systems can be used for measuring exhaust gas from virtually all fuels.
The one-day training provides an in-depth look at the maintenance and commissioning of the fail-safe exhaust gas measurement system LT4/KS1D.
Content
- SIL / Type-tested measurement systems
- SIL classification for the LT4
- Special considerations for different fuel types
- Compliance with the Safety Manual
- Commissioning / Programming
- Fault analysis
- Troubleshooting
- Handling of spare and wear parts in accordance with the Safety Manual
- Function test unit (FTU)
Technical Requirements
No technical aids are required to take.
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Begin: 8:30 am
End: 5:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW43_EN_LT4_Measurement_training_program_new.pdf
LAMTEC Measurement Training
LAMTEC sensors and measuring systems ensure the correct measurement for optimum combustion. Our measuring systems can be used for measuring exhaust gas from virtually all fuels.
The 1-day training focuses exclusively on the Measurement Systems LT1/LS1, LT2/LS2/KS1D, LT3/LS2/KS1D and LT3-F.
Content
- System overview/Options
- SIL/type approved equipment measurement systems
- Measurement principle
- Start up/programming
- Fault analysis
- Fault remedy
Technical Requirement
No technical aids are required to take part in the training course
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Begin: 8:30 am
End:5:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW43_EN_Measurement_training_program_new.pdf
LAMTEC Flame Scanner Training
An innovative and versatile flame scanner for a wide range of applications that can address virtually any control task. This is the next generation of flame monitoring.
The 1-day training focuses exclusively on the flame scanners F200K and F300K.
Content
- System overview
- Installation
- Function overview
- Start up/programming
Technical Requirement
- Laptop with Windows operating system
- Administration rights to installdrivers and software required for the trining.
- 1x free USB interface for USB CAN module of the Flamescanner Remote software
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW43_EN_FLAME_training_program.pdf
LAMTEC Ignition Training
The LAMTEC gas burner igniter GFI ignites your main burner to support your main burner flame or can be used flexibly to preheat the system. The GFI is user-friendly and can be used for all fuels and gases. A large and stable output- and setting range is available.
LAMTEC HEI high-energy igniters are fuel-independent igniters and can be used to ignite the main burner. From basic to high-end applications, HEI is characterized by its ease of use and flexibility with all gaseous and liquid fuels.
The half-day training course deals in detail with the GFI 35, 48, 70, 89 gas burner igniters and the HEI500 and HEI600 electric high-voltage igniters.
Content
- System-Overview
- Basics
- System Installation
- Function overview
- Differentiation between GFI and HEI
Technical Requirement
No technical aids are required to participate in the training.
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 12:00 noon
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW43_EN_Ignition-Systems-training_program.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this
revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTEC
- Burner Control ETAMATIC
- Remote (PC) Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Technical Requirements:
- Laptop with Windows operating system
- Administrator rights to install drivers and software required for training.
- Possibility to change IP address
- Possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Module 2: Day 4 Optionally bookable: Mixed combustion
(Requirement for participation in Module 1)
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Begin: 8:30 am
End:5:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW48_EN_CMS_training_program-option-mixed-combustion.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW04_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW04_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC LT4 Expert Training
QUALIFY.
INSTALL SAFELY.
PROVIDE PROFESSIONAL SERVICE.
YOUR PATH TO LT4 AUTHORISATION
The compact intensive training for maximum independence in LT4 projects. From an overview of LAMTEC measurement systems and the basics of measurement technology to safe commissioning and maintenance.
Successful completion of this training authorises participants to independently commission and maintain the LT4 system, thus ensuring the continuation of the safety certification.
Training Contents
- Basics and overview of LAMTEC measurement systems
- SIL & standards at a glance
- LT4 product overview
- Function Test Unit (FTU)
- LT4 / FTU commissioning & fault diagnosis
- Multiple-choice test
Technical Requirements
No technical equipment required
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Begin: 9:00 am
End: 5:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW14_EN_LAMTEC_LT4_Training_Programme_EN_0804.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW17_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC ETAMATIC training
All-in-one for simple integrated, coordinated electronic control and maximum efficiency: This is the LAMTEC ETAMATIC. It combines all the functions required for burner control in a compact housing.
The 3-day training course deals extensively with our burner control unit ETAMATIC.
Content
- System survey/options
- Hardware/adjustments
- Installation
- Start up/programming
- Fault analysis
- Fault remedy
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers and software required for training.
- 1x free USB interface for USB CAN module
- 1x free serial interface or a 2nd free USB interface for USB-serial adapter (which can be provided during the training)
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW24_EN_ETAMATIC_training_program.pdf
LAMTEC LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW27_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC Sales/Project training for modern combustion and process technology
In this two-day training course, you will receive all the important information that is essential for planning our modern combustion and process technology.
Day 1
9:00 am - Welcome
- Overview of the current LAMTEC product range
10:15 am - Coffee Break
10:30 am - Burner combustion management system BT300
12:15 pm - Lunch
1:15 pm - Combustion Management System CMS
- Modules, variants and configuration
- Range of functions
- Options
- Approvals
- Changing the burner/air ratio using correction activation
- Correction safe/not safe
- Biogases/waste/H2
- Two or more burners in one combustion chamber (master/slave)
Mixed firing
3:15 pm - Coffee Break
Continued CMS
- Actuators and dampers in conjunction with CMS
- Use of actuators that are not included in the type range
- Innovations in standardisation
- System approval
- SIL versus type approval
- Safety Manual CMS/PLC in the CMS
- The BC300 and BC400 automatic burner controls
- CMS configtool
Control functions for combustion optimization
- Flue gas measurement
- O2 control
- Control strategy
- Correction range aspects / false air problem
- Multi burner plants
- CO/H2 control
- Control strategy
- Adventages of CO/H2 control
- Fault tolerance
- Safety evaluation
TEC Center
- Options / special programs (non fail-safe)
- Examples from practice
Outlook: Planned new features and innovations
Approx. 5:00 p.m. End of the first day
6:00 p.m. Dinner
Day 2
9:00 am - Flame and Ignition Systems
- Ignition Systems overview
- GFI 35,48,70,89
- Presentation and project planning
- System overview
- HEI 500+ HEI600
- Presentation and project planning
10:45 am - Coffee Break
11:00 am -Flame Monitoring System
- (Overview of LAMTEC flame scanners)
FFS07, FFS08, FFS30, F200K, F300K- functional principle
- selection of sensors IR/UV or UVIR
- product range
- project planning
12:15 am - Lunch
1:15 pm - Meassurement Systems
O2, CO/H2 and NOx Meassurement Systems
- System overview of transmitters and probes
- Introduction to the LAMTEC portfolio
- Properties of the individual systems
- Structure and function of the components
- Consideration of different applications
- Device selection according to requirements
Mass Flow Measurement Grid
3:00 pm - Coffee Break
Continue Measurement SystemsContinued
Q&A session
approx 5:00 pm - End of the event
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
- Download more informations:
- 2027-KW38_EN_Agenda__Project_Training_2027.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW40_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
Mixed combustion
- Fuel air ratio setting with 2 fuels
- Fuel air ratio setting with up to 4 fuels
- Combustion management process for mixed firing systems
Technical Requirement
- Laptop with Windows operating system
- Administrator rights to install drivers
- and software required for training.
- possibility to change IP address
- possibility to adjust the firewall settings
- 2x free USB interface
- 1 free Ethernet interface (possibly via USB ethernet adapter)
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW40_EN_CMS_training_program_option_mixed_combustion.pdf
LAMTEC LT4 Expert Training
QUALIFY.
INSTALL SAFELY.
PROVIDE PROFESSIONAL SERVICE.
YOUR PATH TO LT4 AUTHORISATION
The compact intensive training for maximum independence in LT4 projects. From an overview of LAMTEC measurement systems and the basics of measurement technology to safe commissioning and maintenance.
Successful completion of this training authorises participants to independently commission and maintain the LT4 system, thus ensuring the continuation of the safety certification.
TRAINING CONTENTS
- Basics and overview of LAMTEC measurement systems
- SIL & standards at a glance
- LT4 product overview
- Function Test Unit (FTU)
- LT4 / FTU commissioning & fault diagnosis
- Multiple-choice test
TECHNICALREQUIREMENTS
No technical equipment required
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Begin: 9:00 am
End: 5:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW42_EN_LAMTEC_LT4_Training_Programme_EN_1910.pdf
LAMTEC Measurement Training
LAMTEC sensors and measuring systems ensure the correct measurement for optimum combustion. Our measuring systems can be used for measuring exhaust gas from virtually all fuels.
The 1-day training focuses exclusively on the Measurement Systems LT1/LS1, LT2/LS2/KS1D, LT3/LS2/KS1D and LT3-F.
CONTENT
- System overview/Options
- SIL/type approved equipment
- measurement systems
- Measurement principle
- Start up/programming
- Fault analysis
- Fault remedy
TECHNICAL REQUIREMENT
No technical aids are required to take part in the training course.
Training location: LAMTEC training rooms, Josef-Reiert-Straße 26, 69190 Walldorf (Baden), Germany
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 5:00 pm
Please note: Admission at 8:00 am at the earliest!
- Download more informations:
- KW42_EN_Measurement_training_program.pdf
LAMTEC Flame Scanners
An innovative and versatile flame scanner for a wide range of applications that can address virtually any control task. This is the next generation of flame monitoring.
The 1-day training focuses exclusively on the flame scanners F200K and F300K.
Content
- System overview
- Installation
- Function overview
- Start up/programming
Technical Requirement
- Laptop with Windows operating system
- Administration rights to installdrivers and software required for the trining.
- 1x free USB interface for USB CAN module of the Flamescanner Remote software
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 05:00 pm
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW42_EN_FLAME_training_program.pdf
LAMTEC Ignition Training
The LAMTEC gas burner igniter GFI ignites your main burner to support your main burner flame or can be used flexibly to preheat the system. The GFI is user-friendly and can be used for all fuels and gases. A large and stable output- and setting range is available.
LAMTEC HEI high-energy igniters are fuel-independent igniters and can be used to ignite the main burner. From basic to high-end applications, HEI is characterized by its ease of use and flexibility with all gaseous and liquid fuels.
The half-day training course deals in detail with the GFI 35, 48, 70, 89 gas burner igniters and the HEI500 and HEI600 electric high-voltage igniters.
Content
- System-Overview
- Basics
- System Installation
- Function overview
- Differentiation between GFI and HEI
Technical Requirement
No technical aids are required to participate in the training.
Training location: LAMTEC, Josef-Reiert-Straße 26, Germany, 69190 Walldorf (Baden)
For organizational reasons, we ask participants to register at our reception desk on the first day of training.
Start: 8:30 am
End: 12:00 noon
Please note: Admission at 08:00 am at the earliest!
- Download more informations:
- KW42_EN_Ignition_Systems_training_program.pdf
LAMTEC CMS training module 1 & 2
Whether it be a standard industrial combustion or complex process application, LAMTEC’s revolutionary CMS Burner Management System sets new standards in control automation.
This 4-day Combustion Management System (CMS) training focuses exclusively on this revolutionary burner and plant control system. CMS means “Combustion Made Simple”.
The CMS training course consists of 2 modules. Optionally bookable is module 2 Mixed firing for day 4.
Content
Module 1: Day 1-3
- Scope of functions
- Comparison LAMTE
Burner Control ETAMATIC - Remote Software
- Module management
- IO-Matrix
- GUI/UI
- Programming curves
- Digital inputs and outputs
- Analog inputs and outputs
- Setting parameters
- LT3 / LT3-F
Module 2: Day 4 Optional
Prerequisite for participation in Module 2 is participation in Module 1
- Download more informations:
- KW47_EN_CMS_training_program_option_mixed_combustion.pdf
Didn't find the right course for you in our training program?
LAMTEC Individual Training Courses by appointment and offer.
The amount of training course and content will be tailored to your requirements. In our training center in Walldorf, we have extensive hardware and software to create a high degree of realistic simulations.
Date and duration by arrangement. We will be happy to make you an offer in advance.
